Trak Two-Axis CNC Mill ("Trak Mill")

This computer numerically controled (CNC) mill is programmable in the XY-plane on the attached digital interface. Files can be uploaded via a USB. With this mill, users can position the drill, mill lines (in any direction), mill arcs, cut out circles, and make profiles and pockets. All plastics and metals can be milled, however, steel requires the machine to be put into a lower gear. Note that the Z-plane control is manual and that wood is not allowed on the machine. This machine is located in the BME Shop in the Whitaker Biomedical Engineering Building.

Image: 
Hours: 
BME Machine Shop hours are dependent upon the semester; contact instructors for open hours
Access Notes: 
Contact Marty Jacobson or Raja Schaar for training; access granted to all majors with training
Contact Information: 
Marty Jacobson (at marty@gatech.edu) or Raja Schaar (at raja@gatech.edu)
Safety and Training: 
Marty Jackson and Raja Schaar hold a training series one to two times a week at the start of every semester. Contact the instructors to be trained.
Summary Description: 
CNC Mill
GIS data: 
POINT (-84.396762 33.778493)
Address: 
313 Ferst Drive
Atlanta, GA 30332
United States
Map of Georgia Tech

Georgia Institute of Technology
North Avenue, Atlanta, GA 30332
Phone: 404-894-2000